Strain Gauge Bridge Isolating Repeater attachement

Strain Gauge Bridge Isolating Repeater - D1064S

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
Strain Gauge Bridge Isolated Converter
Up to four 350 Ω load cells in parallel or up to five 450 Ω load cells in parallel or up to ten 1000 Ω load cells in parallel
0/4-20mA, 0/1-5 V, 0/2-10 V Output Signal
Modbus Output
Field Automatic Calibration
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
Fully programmable operating parameters
High Reliability, SMD components
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Converter D1064S acts as a galvanically isolated interface installed between a PLC/DCS in Safe Area and a load cell (or group of load cells) in Hazardous Area. Up to four 350 Ω load cells, or five 450 Ω load cells, or ten 1000 Ω load cells can be connected in parallel.

It provides a fully floating power supply voltage with remote sensing capabilities to load cells located in Hazardous Area and converts the mV signal from the load cell into a 0/4-20mA or 0/1-5 V or 0/2-10 V signal according to user desired range. Output circuit provides both current source and sink capabilities. Modbus output is also provided to interface PLC/DCS using digital communication.

D1064_DTS0239_EN.pdf D1064_ISM0088_EN.pdf

No Product Accessories.

Power Bus Enclosure

Strain Gauge Bridge Isolating Repeater - D1064S

D1064S

Configurations

Related Products

Field Bud Isolating Repeater

Strain Gauge Bridge Isolating Repeater

Isolating Repeater