SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail attachement

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail - D1031D

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
NO/NC contact/proximity Detector Input
Four opto isolated voltage free Transistor Output Signals
Transistor Output for fault detection on dual channel version
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
High Density, four channels per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier

The Switch/Proximity Detector Repeater type 1031D is a DIN Rail unit with two independent channels. The unit can be configured for contact or proximity detector, NO or NC and for NO or NC optocoupled open collector transistor output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

The Switch/Proximity Detector Repeater type D1031Q is a DIN Rail unit with four independent channels. The unit can be configured for contact or proximity detector, NO or NC and for NO or NC optocoupled open collector transistor output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

D1031_DTS0023_EN.pdf D1031_ISM0009_EN.pdf

No Product Accessories.

Number of Channels

Power Bus enclosure

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail - D1031D

D1031D

Configurations

Related Products

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail