SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail attachement

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail - D1032

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
NO/NC contact/proximity Detector Input
Four voltage free SPST Relay contact Output Signals
Relay Output for fault detection on dual channel version
Line fault detection with common signalling available when using Power Bus enclosure
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
High Density, four channels per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The Switch/Proximity Detector Repeater type D1032D is a DIN Rail unit with two independent and isolated channels. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND relay output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

D1032_DTS0148_EN.pdf D1032_ISM0041_EN.pdf

No Product Accessories.

Number of Channels

Power Bus enclosure

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail - D1032

D1032

Configurations

Related Products

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail

4 CH, Switch/Proximity Detector Repeater. Transistor Out., SIL 2

Frequency-Pulse Isolating Repeater DIN-Rail