Frequency-Pulse Converter, Repeater and Trip Amplifier attachement

Frequency-Pulse Converter, Repeater and Trip Amplifier - D1060S

Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
Magnetic pick-up, proximity input sensor
Frequency range DC to 50 KHz input
Repeater output direct or divided by 10, 100, 1000, 10000, 10000 or 1000000
0/4-20mA, 0/1-5 V, 0/2-10 V Output Signal linear or reverse
High Accuracy, μP controlled converter
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
Fully programmable operating parameters
High Reliability, SMD components
High Density, 1 channel converter, repeater and trip amplifier per unit
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The single channel DIN-Rail Frequency-Pulse Converter, Repeater and Trip Amplifiers D1060S converts and repeats a low level frequency signal from magnetic pick-up, contact, proximity, open-collector transistor sensor, TTL CMOS located in Hazardous Area, into a 0/4-20mA or 0/1-5 V or 0/2-10 V signal to drive a Safe Area load.

Repeater output can be direct, divided by 10, 100, 1000, 10000, 100000, 1000000 or programmed with alarm function. One independent Alarm Trip Amplifier is also provided. Alarm energizes, or de-energizes, an SPST optocoupled open-collector transistor for high, low or low-startup alarm functions. The alarm trip point is settable over the entire input signal range. When repeater output is used as alarm output the unit provides two independent alarms.

D1060_DTS0162_EN.pdf D1060_ISM0054_EN.pdf

No Product Accessories.

Power Bus Enclosure

Frequency-Pulse Converter, Repeater and Trip Amplifier - D1060S

D1060S

Configurations

Related Products

TX Repeater, Power Supply, and Trip Amplifier

Universal Temperature Converter and Trip Amplifier

Repeater Power Supply / Analog Signal Converter and Trip Amplifiers