Linearity: 2", 2.8", 3.8", 4.7" Ranges - ±1.0% Full Scale, 10" to 25" Ranges - ±0.5% Full Scale, 30" to 80" Ranges - ±0.25% Full Scale
Repeatability - ±0.02% Full Scale
Construction - Thermoplastic Body
Wire Rope - Ø.018 Jacketed Stainless Steel
Weight - 6.7 oz.
Connections - Electrical cable, or plastic connector
Life: Ranges to 4.7" - 2,000,000 full stroke cycles, Ranges 10" to 25" - 500,000 full stroke cycles, Ranges 30" to 80" - 250,000 full stroke cycles
The JX-P510 series transducer offers a voltage output with wide adjustability to give a 0 to 5, 0 to 10, ±5 or ±10 VDC output. The device may be powered with any voltage in the range of 4.9 to 30 VDC. Zero and span adjustment potentiometers are accessible by removing two sealing screws in the rear of the transducer housing.
With the zero position set anywhere within the first 30% of total travel, the span may be adjusted to give a full 0 to 5 or 0 to 10 VDC output with the span set anywhere within the last 20% of travel. Alternatively, the zero position may be set anywhere between 40% and 60% of full travel to give an output of ± 5 or ± 10 VDC with the span set between 80% to 100% of the longest travel from the zero position.
The JX-P510 series measuring transducer is a low cost device for use in moderate duty applications in hostile wet or dry environments. The chemical resistant thermoplastic case of the transducer provides IP-65 (NEMA 4X) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur.
An integral dust wiper prevents the entry of debris as the wire rope is retracted. The electrical connection methodology includes an optional sealed bulkhead fitting with multi-conductor electrical cable or an optional connector with mating connector. As a convenience, optional electrical connection locations on the transducer body are offered. The wire rope exit direction may be specified at time of order or may be user adjusted at time of installation.
