Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
Universal AC supply voltage (85 to 250 Vac, 48 to 400 Hz)
NO/NC contact/proximity Detector Input
Two SPDT Relay Output Signals
SPDT Relay Output for fault detection on single channel version
Three port isolation, Input/Output/Supply
EMC Compatibility to EN61000-6-2, EN61000-6-4
In-field programmability by DIP Switch
High Reliability, SMD components
High Density, two channels per unit (D1130D)
Simplified installation using standard DIN Rail and plug-in terminal blocks
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.
The Switch/Proximity Detector Repeater type D1130S is a DIN Rail unit with one channel. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND SPDT relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
The Switch/Proximity Detector Repeater type D1130D is a DIN Rail unit with two independent channels. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND SPDT relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
