The Unimeasure HX-P1010 Series Position Transducer provides an output voltage from -10 VDC to 10 VDC with adjustability to -5 VDC to 5 VDC. The zero position may be set within 10% to 90% of the total range of the transducer. The output voltage will be positive when the cable is extending from the zero position and negative when retracting from the zero position. The span may be adjusted to the maximum output voltage within 50% to 100% of the longest possible travel from the zero position, whether positive or negative. A dual voltage input is required but a single excitation voltage option is available to accommodate input voltages in the range of 4.9 to 30 VDC.