Ultra Electronics EOTec 2000 Optical Interface Module

Ultra Electronics EOTec 2000 Optical Interface Module

$1.00

The Optical Interface Module (OIM) accepts a signal from the backplane, converts it to an optical signal, and transmits this signal down the fiber optic cable. Conversely, the module will receive optical signals, condition the signal and make it available to the backplane.
• Extend your network up to 30 km without a repeater
• SMA or ST fiber connectors
• Diagnostic Output (4-20 mA)
• Up to 5 optical modules per modem
• Single/Multi-mode conversion possible
• 850nm or 1300nm wavelength
• High/Low power setting
• Long lifetime – Class I LED

Description

The Optical Interface Module (OIM) accepts a signal from the backplane, converts it to an optical signal, and transmits this signal down the fiber optic cable. Conversely, the module will receive optical signals, condition the signal and make it available to the backplane. Considerations when selecting an Optical Interface Module (OIM)
– Is the fiber optic cable single mode or multi-mode?
– What types of connectors terminate the fiber optic cable? (ST or SMA)

– What is the total loss on the fiber optic link? (This number must be less than the optical budget of the OIM selected)

– Is fiber link monitoring desirable?