GM International SIL3 Repeater Power Supply

GM International SIL3 Repeater Power Supply


  • Input: 4-20 mA (2 wire Tx current limited at ≈ 25 mA)
  • Output: 4-20 mA, on Max. 600Ω load in source mode; V min. 5V at 0Ω load V Max. 30V in sink mode, current limited at ≈ 25 mA or 1 to 5V on internal 250Ω shunt (or 2 to 10V on internal 500Ω shunt on request).
  • Temperature: Operating: temperature limits; -20ºC to 60ºC, relative humidity max 90% non condensing, up to 35ºC.
  • Storage: temperature limits; -45°C to 80°C.
Add to Wishlist
Add to Wishlist


Model D1014

The Single and Dual Channel DIN Rail Repeater Power Supply, D1014S and D1014D is a high integrity analog input interface suitable for applications requiring SIL3 level (according to IEC61508) in safety related system for high risk industries. Provides a fully floating DC supply for energizing conventional two-wire 4-20 mA transmitters located in Hazardous Area, and repeats the current in floating circuit to drive a Safe Area load. 1 or 2 totally independent and isolated channels I.S. analog input for 2 wires loop powered Hart transmitters, provides 3 port isolation (input/ output/supply) and current (source or sink) or voltage output signal.