The Switch/Proximity Detector Repeater type D1032 is a DIN Rail unit configurable with two or four independent channels. The unit can be configured for contact or proximity detector, NO or NC and for NE or ND relay output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area. D1032Q quad channel type has four, independent and isolated, input channels and actuates the corresponding output relay. Two actuation modes can be independently DIP switch configured on each input channel: NO In/NE relay or NO In/ND relay. Contact or proximity sensor and its connection line short or open circuit fault detection is also DIP switch configurable: fault detection can be enabled (in case of fault de‑energizes the corresponding output relay and turns on the fault LED) or be disabled (in case of fault the corresponding output relay repeats the input line open or closed status as configured).
D1032D dual channel type has two, independent and isolated, input channels and four output relays; the unit has two DIP switch configurable operating modes