GM International Load Cell/Strain Gauge Bridge Isolating Converter DIN-Rail
by Fmeaddons
GM International Load Cell/Strain Gauge Bridge Isolating Converter DIN-Rail
$1.00
- Output: 0/4 to 20 mA, on max. 600 Ω load in source mode
- V min. 5 V at 0 Ω load V max. 30 V in sink mode, current limited at 22 mA or 0/1 to 5 V or 0/2 to 10 V signal, limited at 11 V.
- Operating Temperature: -20°C to 60°C, relative humidity max 90 % non condensing, up to 35°C.
- Storage Temperature: -45°C to 80°C.
Description
Model D1064S
The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Converter D1064S acts as a galvanically isolated interface installed between a PLC/DCS in Safe Area and a load cell (or group of load cells) in Hazardous Area. Up to four 350Ω load cells, or five 450Ω load cells, or ten 1000Ω load cells can be connected in parallel. It provides a fully floating power supply voltage with remote sensing capabilities to load cells located in Hazardous Area and converts the mV signal from the load cell into a 0/4-20 mA or 0/1-5 V or 0/2-10 V signal according to user desired range. Output circuit provides both current source and sink capabilities. Modbus output is also provided to interface PLC/DCS using digital communication.
