GM International Frequency-Pulse Converter – Repeater & Trip Amplifiers

GM International Frequency-Pulse Converter – Repeater & Trip Amplifiers

$1.00

  • Input: 0-50 KHz Magnetic Pickup or Proximity Switch
  • Output: mA (source) or V Out, Pulse repeater Output
  • Temperature: Operating: temperature limits; -20°C to 60°C, relative humidity max 90% non condensing, up to 35°C.
  • Storage: temperature limits; -45°C to 80°C.

Description

Model D1060
The Single Channel DIN-Rail Frequency-Pulse Converter, Repeater and Trip Amplifiers D1060S converts and repeats a low level frequency signal from magnetic pick-up, contact, proximity, open-collector transistor sensor, located in Hazardous Area, into a 0/4-20 mA or 0/1-5V or 0/2-10V signal to drive a Safe Area load. Repeater output can be direct, divided by 10, 100, 1000, 10000, 100000, 1000000 or programmed with alarm function. One independent Alarm Trip Amplifier is also provided. Alarm energizes, or de-energizes, an SPST optocoupled open-collector transistor for high, low or low-startup alarm functions. The alarm trip point is settable over the entire input signal range. When repeater output is used as alarm output the unit provides two independent alarms.
1 channel I.S. input from frequency-pulse signals, provides 3 port isolation (input/output/supply) and current (source mode) or voltage output signal. In addition it repeats the frequency input and provides one SPST transistor with adjustable alarm trip point. Fully programmable via SWC1090 software.

Downloads

Datasheet